FC APC Patch Cable Single Mode Duplex 9/125um PVC/LSZH
- Model:
- PAT-FC-APC-SM-SX
- Sample:
- Free Sample in Stock
- Time:
- 3 working days
- Made:
- Teleweaver
- From:
- Fiber Patch Cables
Similar with FC APC Patch Cable for options
Introduction to FC APC Patch Cable
FC APC Patch Cable made by Single Mode 9/125um bend insensitive fiber optic cable with four FC/APC fiber optic connectors. FC APC Patch Cable is ideal for connecting 1G/10G/40G/100G/400G Ethernet connections. FC APC Patch Cable can transport data for up to 10km at 1310nm, or up to 40km at 1550nm. Each FC APC Patch Cable Single Mode duplex 9/125um PVC/LSZH is 100% optically inspected and tested for insertion loss before you receive it. SC fiber optic jumper pull-proof jacket design surrounds the popular 9/125um single-mode fiber.
FC APC Patch Cable Specification
| Parameters | Value |
|---|---|
| Connector Type | FC to FC |
| Polish Type | APC to APC |
| Fiber Mode | OS2 9/125μm |
| Insertion Loss | ≤0.3dB |
| Return Loss | ≥60dB |
| Wavelength | 1310/1550nm |
| Fiber Grade | G.652.D |
| Minimum Bend Radius | 30mm |
| Attenuation at 1310 nm | 0.36 dB/km |
| Attenuation at 1550 nm | 0.22 dB/km |
| Fiber Count | Simplex |
| Cable Diameter | 2.0mm |
| Cable Jacket | PVC |
| Polarity | A(Tx) to B(Rx) |
| Operating Temperature | -20~70°C |
| Storage Temperature | -40~80°C |
FAQs on FC APC Patch Cable
Q:What is the max pulling force that can be applied during installation for the standard cable?
A:Thanks for your question. The max pulling force during the cable installation is 70N.
.png)