Customize HTB Converter

Saving up to 30%+ at Factory Price, Life Time Warranty, FREE Sample in Stock

Home > Fiber Optic Components > HTB Converter Netlink 10/100M Singlemode & Multi-mode Fiber Ethernet Media Converter

HTB Converter Netlink 10/100M Singlemode & Multi-mode Fiber Ethernet Media Converter

Get Free Quote & Sample

there is no similar products for recommendation

Feature

Auto negotiation function allows UTP port to select the transmission mode of 10/100M and Full Duplex or Half Duplex.
UTP port supports MDI/MDI-X auto crossover.
Multiple optical interface to be chosen: SC,ST or FC,singlemode/multimode
Supporting 1552 Byte packet
Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Design of internal or external power supply for selection by users

Specification

Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
MAC address table: 1K
Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: ST/SC/FC 100Mbps
Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber (Multimode): 50/125, 62.5/125μm(the max distance up to 2km or 5km)
- Fiber (Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 20 -120km)
Flow Control
- Full Duplex: Supporting standard IEEE802.3x
- Half Duplex: Backpressure
LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power: AC 110V-240V to DC 5V; DC 48V to DC 5V.
Ambient Temperature: 0 ℃ ~ 70 ℃
Humidity: 5% ~ 90%
Dimensions:
- Internal power: 30x110x140mm
- External power: 26x70x93mm

Parameters	Value
Operating standards:	IEEE802.3u, 10/100Base-TX and 100Base-FX
LED:	Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power:	AC 110V-240V to DC 5V; DC 48V to DC 5V.