Similar with PLC Splitter 1x32 for options
Introduction to PLC Splitter 1x32
This PLC Splitter Module is a plastic module called an ABS box with ruggedized fiber jackets of 2mm and up to 3mm with no connectors.Fiber-Mart PLC splitters offer superior optical performance, high stability and high reliability to meet various application requirements.
- Channel: 1×32
- Cable length: customized
- Fiber type: G657A1 or as customized
- Small Size
- Package: PP bag or blister package
- ABS box type module
- Plug and Play Ready
- Multi-way cost is low, the more roads, the more obvious cost advantage.
- Low Polarization Dependent Loss
- Good uniformity & Low PDL
PLC Splitter 1x32 Specification
|PLC Splitter Type
|ABS Box PLC Splitter
|Singlemode G657A1 or G652D
|1m or 1.5m or Requested
|Blockless Steel Tube
|Typical Insertion Loss (≤) dB
|Insertion Loss (≤) dB
|Loss Uniformity (≤) dB
|Polarization Dependent Loss (≤) dB
|Wavelength Dependent Loss (≤) dB
|Return Loss (≥) dB
|Directivity (≥) dB
|Temperature Dependent Loss (≤) dB
FAQs on PLC Splitter 1x32
Q:I have a question regarding PLC splitter. Is there any way to make it bi-directional, if you shine light into fiber 4, you will see any light out of the IN fiber?
A:Hi, PLC splitter is generally used in PON network, if you use it in PON network, then it can meet your requirement, but if not, it can not achieve the bi-directional transmission. Because if multiple transceivers in the same wavelength from fiber 4 transmit signals to the IN fiber transceiver, then this transceiver cannot distinguish the signals. And PON network adopts Time division multiplexing technology, so the transceiver can distinguish the signals from different transceivers.
Q:Can I Install a Cable Splitter on My Own?
A:Most people will choose to have a cable or internet company come out to install a splitter.