Similar with PLC Splitter 1x32 for options
Introduction to PLC Splitter 1x32
1×32 PLC Splitter divides or combines a signal inputs to 32 outputs.
1xN PLC splitters are precision aligning process to divide a single optical input(s) into multiple optical outputs uniformly,while 2xN PLC splitters divide a dual optical input(s) into multiple optical outputs. Fiber-Mart PLC splitters offer superior optical performance, high stability and high reliability to meet various application requirements.
Fiber-Mart provides a various of 1xN and 2xN PLC blockless splitters, including 1×2, 1×4, 1×8, 1×16,1×32, 1×64 blockless fiber type PLC splitter and 2×2, 2×4, 2×8, 2×16, 2×32, 2×64 blockless fiber type PLC splitters.
- Plug and Play Ready
- Multi-way cost is low, the more roads, the more obvious cost advantage.
- Low Polarization Dependent Loss
- Good uniformity & Low PDL
PLC Splitter 1x32 Specification
|PLC Splitter Type||Blockless PLC Splitter|
|Fiber Type||Singlemode G657A1 or G652D|
|Fiber Length||1m or 1.5m or Requested|
|Package Style||Blockless Steel Tube|
|Typical Insertion Loss (≤) dB||16.2|
|Insertion Loss (≤) dB||17.1|
|Loss Uniformity (≤) dB||1.5|
|Polarization Dependent Loss (≤) dB||0.3|
|Wavelength Dependent Loss (≤) dB||0.5|
|Return Loss (≥) dB||50|
|Directivity (≥) dB||55|
|Temperature Dependent Loss (≤) dB||0.8|
FAQs on PLC Splitter 1x32
Q:What is the difference between the bare fiber and Blockless splitter?
A:Bare fiber-All ends are bare fibers (0.9/2.0/3.0µm), easy to be spliced.Requires the least space during cabling;the Blockless splitter is Resembles bare fiber PLC splitter, but has fiber optic connectors.Uses stainless tube package for the PLC splitter chip.
Q:Can I Install a Cable Splitter on My Own?
A:Most people will choose to have a cable or internet company come out to install a splitter.