Similar with 1x8 Fiber PLC Splitter for options
Introduction to 1x8 Fiber PLC Splitter
1×8 Fiber PLC Splitter feature low IL& PDL, high isolation suit for 1260nm~1650nm optical fiber signals’ splitter and distributing in PON networks. 1×8 Fiber PLC Splitter with one input and 8 output, It can assembled with 9 units fiber optic connectors as your requirement. 1×8 Fiber PLC Splitter Blockless single mode use the G657A fiber and the max bending radius of the fiber is 15mm. 1×8 Fiber PLC Splitter directly with 0.9mm fiber terminals, tail length according to customer specified.
- LAN, WAN & Metro Networks
- Telecommunication Networks
- Passive Optical Networks
- FTT(X) Systems
- Value Added Module
1x8 Fiber PLC Splitter Specification
|PLC Splitter Type||Blockless PLC Splitter|
|Fiber Type||Singlemode G657A1 or G652D|
|Fiber Length||1m or 1.5m or Requested|
|Package Style||Blockless Steel Tube|
|Typical Insertion Loss (≤) dB||10.2|
|Insertion Loss (≤) dB||10.7|
|Loss Uniformity (≤) dB||0.4|
|Polarization Dependent Loss (≤) dB||0.2|
|Wavelength Dependent Loss (≤) dB||0.3|
|Return Loss (≥) dB||50|
|Directivity (≥) dB||55|
|Temperature Dependent Loss (≤) dB||0.5|
FAQs on 1x8 Fiber PLC Splitter
Q:Does this fiber optic plc splitter 1×8 can be used in OM1 application?
A:No, it doesn’t. Our PLC splitters only support singlemode application, and the fiber type is G657A1, if you want multimode splitters, please refer to FBT Coupler Splitter.
Q: What is the loss of fiber optic plc splitter 1×8?
You can check the below table to see the 1×8 plc splitter loss and simliar 1xn plc splitters
|Splitter Ratio||Ideal Loss||Excess Loss (dB, max)||Typical Loss (dB)|
|1:2 plc splitter||3dB||1dB||4dB|
|1:4 plc splitter||6dB||1dB||7dB|
|1:8 plc splitter||9dB||2dB||11dB|
|1:16 plc splitter||12dB||3dB||15dB|
|1:32 plc splitter||15dB||4dB||19dB|
Send Inquiry Now
Please feel free to contact us if you are looking for FREE sample for this , We will get back to you within 6-12 hours.