Similar with 1x4 PLC Splitter for options
Introduction to 1x4 PLC Splitter
The planar optical wave circuit (PLC) splitter is an optical power management device made of silicon optical waveguide technology, which distributes optical signals from the central office (CO) to multiple locations.
Bare fiber splitter is an ODN product suitable for PON network. It can be installed in the pigtail box, test instrument and WDM system to minimize the space occupation. Optical fiber protection is relatively fragile, so it is necessary to carry out a complete protection design in the bearing box and equipment to protect the splitter.
- Channel: 1×4
- Cable length: customized
- Fiber type: G657A1 or as customized
- Small Size
- Package: PP bag or blister package
- Low PDL Compact Design
- Good channel-to-channel uniformity
- Wide Operating Temperature: from -40℃ to 85℃
1x4 PLC Splitter Specification
|PLC Splitter Type||Bare Fiber Blockless PLC Splitter|
|Fiber Type||Singlemode G657A1 or G652D|
|Fiber Length||1m or 1.5m or Requested|
|Package Style||Blockless Steel Tube|
|Typical Insertion Loss (≤) dB||7|
|Insertion Loss (≤) dB||7.2|
|Loss Uniformity (≤) dB||0.4|
|Polarization Dependent Loss (≤) dB||0.2|
|Wavelength Dependent Loss (≤) dB||0.3|
|Return Loss (≥) dB||50|
|Directivity (≥) dB||55|
|Temperature Dependent Loss (≤) dB||0.5|
FAQs on 1x4 PLC Splitter
Q: What is typical optical loss for 1×8 splitter?
A:1310 / 1550 nm 1×8 Dual-Window Fiber Optic Splitters.
Q:What is the difference between the bare fiber and Blockless splitter?
A:Bare fiber-All ends are bare fibers (0.9/2.0/3.0µm), easy to be spliced.Requires the least space during cabling;the Blockless splitter is Resembles bare fiber PLC splitter, but has fiber optic connectors.Uses stainless tube package for the PLC splitter chip.
Q:Can I Install a Cable Splitter on My Own?
A:Most people will choose to have a cable or internet company come out to install a splitter.