
MTRJ Patch Cord Multimode 50/125um Duplex
- Model:
- PAT-MTRJ-MTRJ-OM3-DX
- Sample:
- Free Sample in Stock
- Time:
- 3 working days
- Made:
- Teleweaver
- From:
- Fiber Patch Cables
- Tag:
- Fiber Optic Jumper, Multimode Fiber Patch Cable,
Similar with MTRJ Patch Cord for options
Introduction to MTRJ Patch Cord
MTRJ Patch Cord with MTRJ to MTRJ termination, this high-quality fiber optic patch cable is specifically designed for ethernet, multimedia, or communication applications. MTRJ Patch Cord pre-connect the MTRJ connector what features an easy-to-use latch-type design similar to the RJ connector on a Cat5 patch cable, MTRJ Patch Cord connectors’ half the size of the SC connector. With its small footprint design, the MTRJ Patch Cord Multimode 50/125um duplex can increase the port density.
MTRJ Patch Cord Specification
Parameters | Value |
---|---|
Connector Type | MTRJ to MTRJ |
Fiber Mode | Multimode 50/125um |
Insertion Loss | ≤0.3dB |
Return Loss | ≥45dB |
Wavelength | 850/1300nm |
Fiber Grade | G.652.D |
Minimum Bend Radius | 30mm |
Fiber Count | duplex |
Cable Diameter | 2.0mm |
Cable Jacket | PVC |
Polarity | A(Tx) to B(Rx) |
Operating Temperature | -20~70°C |
Storage Temperature | -40~80°C |
FAQs on MTRJ Patch Cord
Q:What is the max pulling force that can be applied during installation for the standard cable?
A:Thanks for your question. The max pulling force during the cable installation is 70N.
Send Inquiry Now
Please feel free to contact us if you are looking for FREE sample for this , We will get back to you within 6-12 hours.