ST to LC Fiber Jumper APC Single Mode Duplex
- Model:
- PAT-LC-ST-APC-SM-DX
- Sample:
- Free Sample in Stock
- Time:
- 3 working days
- Made:
- Teleweaver
- From:
- Fiber Patch Cables
Similar with ST to LC Fiber Jumper for options
Introduction to ST to LC Fiber Jumper
ST to LC Fiber Jumper is the fiber optic cable assembled one ST fiber optic connector and one LC fiber optic connector. ST to LC Fiber Jumper possible connect to CATV, optical switch or telecommunication equipment rapidly. ST to LC Fiber Jumper thick layer of protection is used to connect the optical transmitter, receiver and the fiber optic terminal box. ST to LC Fiber Jumper APC Single Mode duplex widely used in the telecom structure projects.
ST to LC Fiber Jumper Specification
| Parameters | Value |
|---|---|
| Connector Type | LC to ST |
| Polish Type | APC to PC |
| Fiber Mode | OS2 9/125μm |
| Insertion Loss | ≤0.3dB |
| Return Loss | ≥60dB |
| Wavelength | 1310/1550nm |
| Fiber Grade | G.652.D |
| Minimum Bend Radius | 30mm |
| Attenuation at 1310 nm | 0.36 dB/km |
| Attenuation at 1550 nm | 0.22 dB/km |
| Fiber Count | Simplex |
| Cable Diameter | 2.0mm |
| Cable Jacket | PVC |
| Polarity | A(Tx) to B(Rx) |
| Operating Temperature | -20~70°C |
| Storage Temperature | -40~80°C |
FAQs on ST to LC Fiber Jumper
Q:What is the max pulling force that can be applied during installation for the standard cable?
A:Thanks for your question. The max pulling force during the cable installation is 70N.
.png)